Looking back at the latest printing related standa

2022-08-20
  • Detail

Looking back on the latest printing related standards in 2011, time flies. 2011 is coming to an end. Looking back on the past, the printing industry has experienced several ups and downs in 2011, from the rising cost of domestic raw materials at the beginning of the year, brain drain, lack of power supply, to the debt crisis in Europe and the United States and other countries, which led to the plight of printing enterprises, and then to the frequent personnel changes, bankruptcy and mergers and acquisitions of printing machine manufacturing giants, Both domestic and overseas printing enterprises feel that they are unable to do so. However, it is gratifying that the state issued relevant policies in time to solve the difficulties of small and medium-sized printing enterprises. Here, let's review the standards related to printing enterprises launched in the past year

iso/tc 130/wg 12 post press standard

on November 2, 2010, ISO approved the decision of iso/tc130 to turn iso/tc130/tf2 into a working group, with hexiaohui as the leader/convener, and China providing secretariat support. TF2 (post press task force) was officially turned into iso/tc130/wg12 (International post press working group), and China's goal of establishing an international post press working group was successfully achieved

from April 12 to 13, the iso/tc 130/wg 12 (International Post Press Standards Working Group) meeting was held, which was the first meeting after the formal establishment of WG 12. The meeting was chaired by hexiaohui, group leader/convener of WG 12. Twenty five experts from 12 countries including China, Brazil, the United Kingdom, the United States, Germany, Japan, Sweden, Switzerland, the Czech Republic, France, Italy and South Korea participated

at the 25th iso/tc130 annual conference held in Berlin, Germany, on September 19, 2011, the WG 12 conference was chaired by the group leader/convener hexiaohui. 21 experts from 9 countries including China, Brazil, the United Kingdom, the United States, Germany, Japan, Sweden, Switzerland and Indonesia attended the meeting

The establishment of wg12 is a milestone in China's standardization construction, which marks the official internationalization of China's standardization

drafting of two national standards for digital printing

on March 1, 2011, the National Printing Standardization Technical Committee (sac/tc 170) held the first working meeting of the drafting group of two national standards for digital printing in Beijing. The meeting discussed the contents of the first draft of the drafting group of two national standards for digital printing, "terminology of printing technology digital printing" and "classification of digital printing". The conference impact testing machine industry is triggering a green revolution. According to the principles and methods formulated by the state for terminology standards, the number and category of "digital printing of printing technology terminology" were carefully screened, and the 509 drafted terms were reduced to 105. The meeting carefully studied and analyzed the specific content of the classification of digital printing, and revised the content accordingly according to the requirements of national standard formulation and the actual situation in the field of digital printing, reducing the 9 categories of classification methods of digital printing to 5 categories

from June 29 to 30, 2011, the National Printing Standardization Technical Committee (sac/tc 170) held the second working meeting of the drafting group of two national standards for digital printing in Shanghai Publishing and printing college. The conference carefully screened and studied the quantity, category and content of the terms of "printing technical terms Part 8: digital printing" according to the principles and methods of national terminology standards, and reduced 104 terms to 9 computer adjustments with 4 speeds. The meeting carefully studied and analyzed the specific content of the classification of digital printing, and re combed and studied the classification of colorant, color and color number

UV glazing control standard for paper prints

on March 22, 2011, the National Printing Standardization Technical Committee (sac/tc170) held the first working meeting of the national standard drafting group of "control and detection methods for UV curing varnish glazing process of paper prints" in Humen Town, Dongguan City. The meeting seriously discussed the three kinds of raw materials used in the glazing process, including UV varnish, primer and paper prints, the glazing equipment, working environment and process control, and the performance related to the quality of glazing products in six aspects, such as appearance, gloss, adhesion, wear resistance, explosion-proof line and color difference, and determined that the drafting units should further test the friction resistance, color difference before and after glazing, and adhesion requirements, Put forward technical data according to the test results

on July 12, 2011, the National Printing Standardization Technical Committee (sac/tc 170) held the second working meeting of the national standard drafting group of "control and detection methods for the glazing process of UV curing varnish for paper printing" in Shenzhen. With regard to the limitation of VOCs content in UV varnish, the meeting decided to limit the VOCs content to less than 20g/kg according to the principle of strict control and not encouraging the addition of solvents in UV varnish; Aiming at the function of primer in UV glazing process, the qualitative requirements of primer on the back sealing of printed matter and the combination fastness of UV varnish are increased; With regard to the wear resistance and scuffing resistance of the polished oil layer, the meeting studied to combine the two into one and define them with the same method and different friction times; On the basis of referring to the definition of burst line in cigarette bag industry, this paper puts forward clear data requirements for the length and width of burst line; After listening to the experimental data of four-color field ink color and color difference before and after paper white polishing provided by Heshan yatushi Printing Co., Ltd., the technical data of color difference was determined

certification of printing standardization process

international standard ISO 12647, which is a series of international standards on printing technology developed under the auspices of the 130th Technical Committee of the international organization for Standardization (ISO) (i.e. iso/tc 130)

iso 12647 standard is named "printing technology - production process control of halftone color separations, samples and printed matter", which includes 7 parts: parameters and measurement methods, offset printing, cold set ink offset and embossing of paper, gravure printing, silk printing, flexo printing, offset digital proofing

among the seven parts of ISO 12647, the authentication system based on the second part offset printing is more and more widely used in the industry. Yangjinxi, President of the Hong Kong Printing Industry Chamber of Commerce, said: three countries have established their ISO 12647 compliant certification systems, including G7 certification in the United States, PSO certification in Germany and Switzerland, etc

drafting of label printing industry standards

on November 2, 2011, the National Printing Standardization Technical Committee (sac/tc 170) and the label printing branch of China printing and Equipment Industry Association jointly organized the establishment meeting of the publishing industry standard drafting group of basic requirements and testing methods of label printing in Beijing

after discussion, the name of the standard was revised and determined as "printing technology, label quality requirements and inspection methods, Part 1: self-adhesive". The meeting conducted research on the establishment of the drafting group of the industry standard of printing technology label quality requirements and inspection methods Part 1: self adhesive

publication and implementation of the printing standard system table

the research on the digital printing standard system table, a special public welfare scientific research project in the quality inspection industry, began its actual operation in February 2009, and established a project research group composed of experts from China Printing Technology Association, the National Printing Standardization Technical Committee, Beijing Printing Institute, Beijing North Founder Electronics Co., Ltd., Beijing shengcaihong plate making and Printing Co., Ltd, We have successively investigated the current situation of digital printing in China, collected, sorted and studied the international printing standards related to digital printing, organized and held 10 special seminars in different scopes, completed the first, second and third stage research reports of the project, and proposed the standard draft of "digital printing standard system table"

2 on November 23, 2011, the General Administration of publication issued and implemented cy/[learning on the road] as the industry standard of Z 22 2011 "printing standard system table" in the one-year graduation season with document Xin Chu Zi [2011] No. 386. This standard is a guiding technical document drafted by the National Printing Standardization Technical Committee (sac/tc 170). The main drafting units (3) are China Printing Technology Association, Heshan yatushi Printing Co., Ltd., Beijing Printing Institute and the printing association of the Chinese people's Liberation Army. The standard shall be implemented from the date of issuance

Copyright © 2011 JIN SHI