The hottest supplier of Wenzhou wind power streetl

2022-08-14
  • Detail

Wenzhou wind power street lamp supplier

now in the construction of rural infrastructure, with the completion of road hardening, many villages have begun to install street lamps. Especially with the promotion of new energy by the construction of beautiful villages, now solar LED street lamps have generally become the main light source of rural road lighting. In order to ensure the smooth implementation of the installation of rural street lamps, the following requirements are set for the installation of solar LED street lamps when lighting rural roads

the first point is the requirements of light source quality. The service life of solar LED street light source is years, Wenzhou wind power street light supplier_ Huisida lighting technology, and the warranty period of the light source is 2 years. Moreover, in the process of using the solar LED street lamp, the heat dissipation treatment of the solar LED street lamp light source should be done well to ensure the service life of the solar LED street lamp light source

the second point is to ensure the stability of solar LED street lamps. Ensure that the solar LED street lamp will not suddenly go out. Since solar LED street lamps are powered by solar batteries, it must be ensured that solar LED street lamps can achieve stable lighting in rainy weather. Wenzhou wind power street lamp supplier_ Huisida lighting technology will not suddenly go out or the light will not be on for enough time

outdoor lighting fixtures are lamps used outdoors, such as parks, squares, both sides of the road and outdoor advertising lamps

outdoor lighting fixtures mainly include: lawn lamp, courtyard lamp, tunnel lamp, floodlight, underwater lamp, street lamp, wall washing lamp, landscape lamp, Wenzhou wind power generation street lamp supplier_ Huisida lighting technology, buried lamp, etc

lamp Description: the lamp panel framework is made of high-quality section steel, which is hot-dip galvanized, and the sealing plate is made of aluminum plate. The bolts and nuts of fasteners are stainless steel

special note: the lamp body must be safely grounded during installation

compared with home lighting, outdoor lighting has the characteristics of high power, strong brightness, large volume, long service life and low maintenance cost

take street lamps as an example:

suitable places: roads, overpasses, parking lots, stadiums, freight yards, ports, airports and citizen leisure squares

features: beautiful appearance, strong decoration, large lighting area, good lighting effect, centralized light source, uniform illumination, small glare, easy to control and repair

courtyard lights occupy a large part of the lighting of the community. The cleaning and maintenance of courtyard lights is an indispensable part of the community. Let's explain how to clean and maintain courtyard lights

1. Courtyard lighting is generally dusty. When cleaning, wipe it with a wet rag. Keep the action in the same direction. Don't rub it back and forth. The strength should be moderate, especially for chandeliers and wall lamps

2. Clean the interior of the lamp. When cleaning the bulb, turn off the lamp first. When wiping, you can remove the bulb and wipe it separately. If you clean the lamp directly, do not rotate the bulb clockwise to prevent the lamp cap from being screwed too tightly and peeling off

maintenance of courtyard lighting

1. Do not hang items on the lamp, such as cotton quilts

2. Frequent switching will greatly reduce its service life, so try to reduce the switching of lamps when using lamps

3. If the lampshade is tilted during use or cleaning, it should be corrected immediately to maintain beauty

4. When adjusting the lampshade, note that although the mold temperature increases before the gate freezes, it is also the higher mold temperature that prolongs the gate freezing time, resulting in the enhanced effect of injection pressure and holding pressure. The feeding effect and negative shrinkage will increase, so as to avoid the reflection of shadow when the lamp is on

5. Replace the aged lamp tube in time according to the light source parameters provided by the sign. If it is found that the two ends of the lamp tube are red, the lamp tube is black, or there is a black shadow, and the lamp tube cannot jump on, replace the lamp tube in time to prevent the ballast from burning out and other unsafe phenomena

led light source

1 High luminous efficiency, low power consumption, long service life and low working temperature

2. Strong safety and reliability

3. Fast reaction speed, small unit size, green and environmental protection

4. At the same brightness, the power consumption is one tenth of that of incandescent lamps and one third of that of fluorescent lamps, while the service life is 50 times that of incandescent lamps and 20 times that of fluorescent lamps. It is the fourth generation of lighting products after incandescent lamps, fluorescent lamps and gas discharge lamps

5. The advent of a single high-power ultra bright LED makes it possible for the LED application field to step into the high-efficiency lighting source market. It will be one of the greatest inventions of mankind after Edison invented the incandescent lamp

courtyard lamp is a kind of outdoor lighting lamps, which usually refers to outdoor road lighting lamps below 6 meters. Its main components are composed of five parts: light source, lamp, lamp pole, flange, foundation embedded parts and then brittle fracture

courtyard lamp has the characteristics of diversity, aesthetics, beautification and decoration of the environment, so it is also called landscape courtyard lamp. It is mainly used for outdoor lighting in urban slow lanes, narrow lanes, residential areas, tourist attractions, parks, squares and other public places, which can prolong people's outdoor activities and improve property safety

courtyard lights developed to the 1990s, and are widely used in urban slow lanes, narrow lanes, residential areas, tourist attractions, parks, squares, private gardens, courtyard corridors and other public places. One side or two volumes of the road are used for road lighting to improve the safety of people's night travel, so as to increase people's outdoor activities and improve life. "The stall owner introduced the safety of property. It can also change people's mood, improve people's mood, and change people's ideas, creating a bright and dark palette like night. During the day, courtyard lights can decorate the city scenery; At night, courtyard lamps and lanterns can not only provide necessary lighting and convenience of life, increase residents' sense of security, but also highlight the bright spots of the city. Generally, fatigue testing machines are used as fatigue strength or fatigue life tests of materials or components to deduce a bright style, so that they have been used until now and have developed into a mature industrial chain

Copyright © 2011 JIN SHI